Clavia Nord Modular V3 Manuel d'utilisateur télécharger pdf (Page 155)

NORD MODULAR V3.0 7. Module reference: Mixer group

Page 147

The mixer modules in Nord Modular can mix audio signals as well as control signals. If you connect sev-

eral sound sources to a mixer with high or amplified levels, the signal may distort. If this happens, atten-

uate the input signals.

3 3

This mixer has three inputs and one output. Each input is equipped with an attenuation control.

Connect audio or control signals to these red inputs. Attenuate the signals with the corresponding knobs

[Attenuator Type I].

Signal:

Bipolar

8 8

This mixer has eight inputs and one output. Each input is equipped with a separate attenuation control.

Connect audio or control signals to these red inputs. Attenuate the signals with the corresponding knobs.

The preset attenuation value is set to 100 to reduce the risk of distortion [Attenuator Type I].

-6

-6 -6

-6

This function attenuates the output signal with -6 dB. If you experience distortion when mixing several

signals, try activating this function.

The multi-color LED to the left of the output indicates the output level and have the following meaning:

Green: normal signal level, Yellow: signal reaching headroom, Red: overload.

Signal:

Bipolar

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 231 232

Pas de commentaire

Clavia Nord Modular V3 Manuel d'utilisateur Page 155