Clavia Nord Modular V3 Manuel d'utilisateur télécharger pdf (Page 147)

NORD MODULAR V3.0 7. Module reference: Filter group

Page 139

This is a dynamic multimode filter with a slope of 12 dB/octave and resonance control. It is a multi-mode

filter with three outputs: one highpass, one lowpass and one bandpass. The cut-off frequency can be mod-

ulated from an external source.

Displays the cut-off frequency in Hz or notes. Range: E-1 to B9 or 10 Hz to 15.8 kHz. Click in the dis-

play box to change unit.

[A [A

T T

III]

III] III]

III]

The blue input for modulating the cut-off frequency from a control source. The modulation amount is

determined by the rotary knob next to the input. Read more about the modulation types in “Modulation

inputs” on page 32.

Sets the initial cut-off frequency of the filter. The cut-off frequency is indicated in the display box. Range:

E-1 to B9 or 10 Hz to 15.8 kHz.

KBT

KBTKBT

KBT

This is a hardwired connection between the cut-off frequency and the keyboard. At the preset value

“Key", the keyboard will control the cut-off frequency at a rate of one semitone for each key. Turning

clockwise from the center position will increase the tracking, turning counter-clockwise, will decrease it.

Off disconnects the keyboard tracking completely. Click on the triangle above the control to reset the

keyboard tracking to Key.

Displays the resonance in ‘units’. Range: 0 to 127 units.

This is a function that emphasizes the frequencies that is at, or close to, the set cut-off frequency. If set

to 127, the filter starts to self-oscillate and produces a sine wave. Range: 0 to 127 units.

The red audio input.

Three filter characteristics are available at these red outputs. You can use all three at the same time if you

like.

is a Highpass filter,

is a Bandpass filter and

is a Lowpass filter.

Signal:

Bipolar

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 231 232

Pas de commentaire

Clavia Nord Modular V3 Manuel d'utilisateur Page 147