Clavia Nord Lead 3 Manuel d'utilisateur télécharger pdf (Page 41)

System Menu

1 - Memory Protect – On, Off

The Memory Protect setting determines if Programs and Performance

can be stored to the Nord Lead 4 memory or not. The setting is On

when the Nord Lead 4 leaves the factory.

M System, MIDI and Sound menu settings are not protected.

Range: On (default), off

2 - Transpose

This setting can transpose the pitch of the Nord Lead 4 up or down in

semitone steps.

M The MIDI output will not be transposed.

Range: -/+ 6 semitones (default = 0).

3 - Fine Tune

This setting ﬁne tunes the pitch of the Nord Lead 4.

Range: -/+ 50 cent (default = 0).

4 - Sustain Pedal Polarity

Change the polarity of a connected sustain pedal, in case the func-

tionality of the pedal is reversed. The Auto setting will determine what

polarity a connected pedal has.

Range: Auto (default), CL - Close, OP - Open.

5 - Ctrl Pedal Type

Different models of control pedals have different speciﬁcations (resis-

tance, offset and linearity). The most commonly used pedals are pre-

conﬁgured in the Nord Lead 4, select the type you use.

Range: R5 (Roland EV-5, default) , R7 (Roland EV-7), Y7 (Yamaha

FC-7), K0 (Korg EXP-2 & XVP-10), Ft (Fatar & Studiologic VP/25)

6 - Ctrl Pedal Mode

A connected Control pedal can be used to control the Nord Lead 4

volume or as a Continuous Morph Controller.

Range: c1 Volume (default), c2 Wheel Morph.

7 - Ctrl Pedal Gain

Add some gain to the output of a connected Control pedal if it does

not reach the maximum level. Operating a connected control pedal will

display the output level from 0 to 100.

Range: 1 - 10.

8 - Impulse Morph Protect

This is a protection feature for the Impulse Morphs. When this is On,

Impulse Morphs have to be locked for any adjustments to stick or new

Morph settings will be discarded as soon as you release the Impulse

button(s).

Clear Impulse Morph is disabled when Impulse Morph Protect is On,

except if the Morph is locked.

Range: On, Off

A B C D - Slot Output Routing

Route the Slots to the audio outputs of the Nord Lead 4. Slots can be

routed to output pairs (1-2 and 3-4), or single outputs.

E Outputs 1 & 2 are routed to the headphones.

Range: 12 (default), 34, 1, 2, 3, 4.

The Menus

Any settings that you change in the System, MIDI, Sound or Mutator menu will take immediate effect on a global basis, and will be stored until you

change them the next time. Enter the menus by pressing and holding Shift and the System, MIDI, Sound or Mutator button (Slot A - D buttons), the

A-D LED above the buttons will start blinking. Select a function by turning the Program Dial and change the setting by holding Shift and turn the

Program Dial at the same time. Exit the menus by pressing a second time on the Slot button.

Chapter 10 the MeNUs | 41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 52 53

Commentaires sur ces manuels

Pas de commentaire

Clavia Nord Lead 3 Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Clavia Nord Lead 3