Clavia Nord Lead 3 Manuel d'utilisateur télécharger pdf (Page 19)

Chapter 7 paNeL refereNCe | 19

Panel Reference

Master Level

The Master Level knob controls the overall ampli-

tude for the audio outputs - the line level outputs

and the headphone output. The knob’s physical

position indicates the output level and is not stored

in a Program.

 If you need to adjust the output level in indi-

vidual programs, use the Output parameter in

the upper right area on the panel. The setting

of that control is stored in a program.

MIDI LED

The MIDI LED will indicate incoming MIDI messages by brieﬂy lighting

up.

Short LED ﬂashes indicates that MIDI messages are received but not

used in any way by the Nord Lead 4. Longer ﬂashes are indications

that the MIDI messages are actually recognized. This applies to mes-

sages on MIDI channels that are in use, CC messages that will change

Nord Lead 4 parameters, etc..

Continuous Morphs (Morph)

Continuous Morphs are used to

gradually change one or several

parameters with the Morph Controls

- the keyboard velocity and the

Modulation Wheel and Control pedal

- while you are playing.

Hold a Morph button and turn a knob to set the connection between

the Morph control, the parameter destination and the range of the

Morph control.

Velocity

The Velocity Continuous Morph control use the striking force on the

Nord Lead 4 keyboard or incoming MIDI messages to control one or

several destinations.

•A key velocity of 0 represents the parameters original setting.

•A key velocity of 127 represents the parameters morphed setting.

Velocity Morph Destinations

LFO1 Rate LFO1 Amount LFO1 Clk Division

LFO2 Rate LFO2 Amount LFO2 Clk Division

Glide Mod Env Attack Mod Env Dec/Rel Mod Env Amount

Osc2 Semi/N Freq Osc2 Fine/N Res Osc Mod Amount Osc Mix Amount

Amp Env Attack Amp Env Decay Amp Env Sustain Amp Env Rel.

Filt Env Attack Filt Env Decay Filt Env Sustain Filt Env Release

Filter Drive Filter Freq Filter Res Filt Env Amount

Output Level Arp Range Arp Tempo FX Amount

Rev/Del Dry/Wet Delay Tempo Reverb Bright.

Modulation Wheel

The Modulation Wheel or a control pedal is an excellent Morph control,

great for adding drastic or subtle, continuous parameter changes dur-

ing a performance.

Incoming MIDI Control Change messages CC01 and CC11 will also act

as a Modulation Wheel and pedal Morph control.

•The bottom position of the Modulation Wheel or control pedal repre-

sents the original setting of the parameter.

•The top position of the Modulation Wheel or Control Pedal represents

the morphed setting of the parameter.

For a detailed description on how to set up a Morph scenario, please

look at page 14.

Modulation Wheel Morph Destinations

LFO1 Rate LFO1 Amount LFO1 Clk Division

LFO2 Rate LFO2 Amount LFO2 Clk Div.

Glide Mod Env Attack Mod Env Dec/Rel Mod Env Amt

Osc2 Semi/N Freq Osc2 Fine/N Res Osc Mod Amount Osc Mix Amount

Amp Env Attack Amp Env Decay Amp Env Sustain Amp Env Release

Filt Env Attack Filt Env Decay Filt Env Sustain Filt Env Release

Filter Drive Filter Freq Filter Res Filt Env Amount

Output Level Arp Range Arp Tempo Arp Clk Division

Delay Clk Div. Delay Dry/Wet Delay Tempo Reverb Bright.

FX Type FX Amount

M There is a limit on how many Morph Destinations a program can

use; 87 for the synth parameters and 24 for the FX/Reverb/De-

lay. If you reach this limit during the setup of a Morph, the green

Morph LED next to a knob will not be lit. If a copy/paste procedure

will exceed the available amount, the Display will show “FuL”.

Clear Continuous Morphs

Hold Shift and press a Morph button to clear all assignments for that

Morph control.

Program Dial

Turn the Program Dial to select programs or perfor-

mances.

When any of the Menus are entered, the Program

Dial is used to select menu functions and to change

settings (Shift + turn).

The Program Dial is endless, though the array of parameter settings

are not. Once you reach the ﬁrst or last possible setting, turning the

Program Dial further will have no effect.

 The Program Dial has an accelerator feature; when operated

swiftly you scroll through values in larger increments.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Commentaires sur ces manuels

Pas de commentaire

Clavia Nord Lead 3 Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Clavia Nord Lead 3