Clavia Nord Lead 3 Manuel du propriétaire télécharger pdf (Page 143)

NORD LEAD 3 V1.2x 9. Basic MIDI functions: Program/Performance SysEx dumps

Page 141

MIDI C

MIDI CMIDI C

MIDI C

When synching the LFOs and/or the Arpeggio to external MIDI Clock, MIDI Song Position pointer is

used. This means that when you record in an external sequencer, it will play back the Arpeggio pattern

and/or LFO cycle exactly the way they were recorded - even if you start the sequencer in the middle of

the sequence. Please refer to “Master Clock” on page 117 for more info about synching to external MIDI

Clock.

C C

“C

“C “C

“C

”

””

”

Consider a situation where you record a Controller message, e.g. a filter opening, in the middle of your

sequencer song. Then you “rewind” the sequencer to a position before the recorded filter opening. The

problem is that the Nord Lead’s filter will remain opened, although it really should be as it was before

you recorded the filter opening. To solve such problems, several sequencers include a function called

“Controller Chasing”, which keeps track of Controller changes and tries to adjust the settings on the in-

strument according to the current position in the sequencer song.

However, in our example this wouldn’t help much, because the filter opening was the first Controller

message recorded in the song. The sequencer has no information about the filter setting before the re-

corded change, and therefore cannot “chase” the settings properly. To solve this, you could record a

“snapshot” of all Controller settings of the Nord Lead 3 at the beginning of your sequencer song. This

can be done in two ways:

• by manually using the ‘Send MIDI Controllers’ function of the MIDI menu described on page 121.

• by sending an “All Controllers Request” SysEx message from the sequencer to the Nord Lead 3, which

will respond by dumping all its Controller values into the sequencer for recording. The “All Control-

lers Request” message is described on page 155.

/P/P

S S

P P

/P/P

D D

To dump a single Program or Performance via MIDI as SysEx data, to another Nord Lead 3 or for re-

cording the data into another MIDI device, do like this:

1. Connect a cable from MIDI O

on the Nord Lead 3 to MIDI In on the other device.

2. Set up the receiving device so that it accepts MIDI SysEx data.

3. Select the Program or Performance you want to dump by simply loading it to a Slot (in Program

mode or Performance mode depending on what you want to send)

4. If needed, set the destination MIDI device to “recording mode”.

5. Press S

HIFT

+MIDI (Dump One).

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 167 168

Commentaires sur ces manuels

Pas de commentaire

Clavia Nord Lead 3 Manuel du propriétaire Page 143

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Clavia Nord Lead 3